Clean a ribbed PLA bioplastic lamp gently with a soft dry cloth. If needed, use a slightly damp cloth and then dry the surface. Do not soak the lamp, spray cleaner directly onto it or let moisture enter the charging port. The goal is to lift dust from the ribs without polishing away texture or stressing thin edges.
Remove loose dust first
Switch the lamp off and disconnect it from charging. Use a clean microfiber cloth or a very soft brush to follow the direction of the ribs. Work from top to bottom so loosened dust does not settle back into areas already cleaned.
Do not force a hard tool into the grooves. A toothpick, stiff brush or abrasive pad can mark the surface and catch on fine edges.
Use minimal moisture for marks
For a fingerprint or light surface mark, dampen the cloth rather than the lamp. Test a small hidden area first. Wipe gently and dry immediately with a second cloth.
Avoid strong household chemicals, solvents and abrasive powders. PLA bioplastic should not be treated like stone, metal or glazed ceramic.
- Keep water away from the button and charging port.
- Do not place the lamp under a tap.
- Do not use a hair dryer or high heat to speed drying.
- Support the base while cleaning the upper form.
- Let the lamp dry fully before charging.
Prevent dirt instead of deep cleaning
Place the lamp away from cooking grease, open soil and areas where drinks regularly spill. In cafés, include the lamp in the dry table-reset routine rather than waiting for visible buildup.
Store charging accessories separately from dirty cleaning cloths. A clean port and undamaged connector matter as much as a clean exterior.
How Ruvaa Mono fits this use
Ruvaa Mono has a ribbed PLA bioplastic body and should be wiped with a soft dry or slightly damp cloth. Keep it away from rain, standing water and high heat. The product is not waterproof. Its visible touch button and USB-C port should remain dry throughout cleaning.
Explore the Muvèlo Ruvaa Mono portable ambient lamp.
Related reading
See the Rechargeable Table Lamp Buying Guide and the USB-C Charging and Battery Guide.
Frequently asked questions
Can I use surface disinfectant on PLA bioplastic?
Do not assume a chemical is compatible. Ask Muvèlo before using disinfectants or solvents, and never spray the lamp directly.
Can dust be vacuumed from the ribs?
A strong nozzle may damage or pull at the surface. A soft cloth or gentle brush gives you more control.
For more practical lighting and design guides, visit the Muvèlo journal.